Wider Cargo System

From SegwaySocial

by Joushou on SegwayChat - edited by Jeff Backes

Why

The cargo-plates have really been annoying me... They limited my movement way too much.

I took a look at them, and figured out you could use the mounting-point for the cargo-bags, as well as two of the real mounting-points to move it out of my way

UPDATE:

I figured out that this is actually intended, but not very well explained in the instructions, so i'm leaving it here, incase someone else doesn't know...

Tool Required

• 4 mm Hex Driver
• Legs that need more room
• Segway

Instructions

• If you have already installed the cargo-plates, remove the 8 hex-screws to unmount it.

• Take the brackets, and screw 1 screw in each of them, as shown here (x is a screw, o is a free hole):

 /  /                   \  \
 |  |                   |  |
 |  |                   |  |
-------               -------
| o o |               | o o |
|     |               |     |
| o x |               | x o |
-------               -------
 |  |                   |  |
 |  |                   |  |
 |  |                   |  |
 |  |                   |  |
-------               -------
| o x |__           __| x o |
|     |   '       '   |     |
| o o |--. \     / .--| o o |
-------  | |     | |  -------
 \  -____| |_   _| |____-  /
  '._________   _________.'

Cargo Plate move to its outer most position.

• Align the cargo-plates as shown here, with the 3 holes in the plate covering the free holes, and then mount it with the 6 screws.
  You should have all of the screw holes in the brackets filled.

Congratulations, now there's room for your legs!

View from the rear with both cargo plates moved out to their outer most position